How to Clean a Shark Vacuum Filter

Learn how to remove, rinse and dry the foam, felt and HEPA filters in a Shark vacuum, plus how to care for self-cleaning models and the dust cup.

3 min read6 viewsHow to Clean a Shark Vacuum Filter
— · 0 votes
Contents
  1. Shark filter types and where to find them
  2. Shark filter removal, washing and rinsing
  3. Filter drying before you refit
  4. Shark vacuum filter care questions
  5. How do you clean a Shark self-cleaning vacuum?
  6. Can you use soap to wash a Shark vacuum filter?
  7. How often should you clean a Shark vacuum filter?
  8. When should you replace a Shark vacuum filter instead of washing it?

To clean a Shark vacuum filter, remove it, rinse it in cool water and let it air dry. Unplug the vacuum or take the robot off its dock before you open any filter housing. Soap and detergent stay out of the process, since residue can clog the filter media. The steps below cover filter types, washing, drying and the extra care that self-cleaning models need.

Shark filter types and where to find them

Many Shark vacuums carry two filter stages: a pre-motor filter and a post-motor filter. The pre-motor filter, a foam disc with a felt pad, sits near the vacuum dust cup. The post-motor filter is often a HEPA, or high-efficiency particulate air, filter near the exhaust. Positions differ by model, so check your manual before you pull any part loose.

Shark filter removal, washing and rinsing

Shark filter removal starts with emptying the vacuum dust cup and lifting the filters out by hand. Tap loose dust off the foam and felt, then rinse them under cool running water. Squeeze the foam gently and avoid twisting or wringing it, which can tear the material. Check the label or manual before rinsing a HEPA filter, since some Shark HEPA filters are not washable.

Filter drying before you refit

Filter drying matters because a damp Shark filter can grow mildew and let moisture reach the motor. Lay the parts flat or stand them upright in a ventilated spot at room temperature. Keep filters away from hair dryers, ovens, radiators and direct heat, which can warp or shrink them. Refit the filters only when every layer feels completely dry to the touch, including the center.

Shark vacuum filter care questions

How do you clean a Shark self-cleaning vacuum?

A Shark self-cleaning vacuum still needs its filters, dust cup and brushroll cleaned by hand. The self-cleaning brushroll strips wrapped hair, yet threads and grit can still collect at its ends. Unplug the vacuum, remove the brushroll if your model allows it, and clear the ends. Wash and dry the filters with the same rinsing steps used on standard Shark models.

Can you use soap to wash a Shark vacuum filter?

No, a Shark vacuum filter should be rinsed with plain cool water only. Soap and detergent leave a residue that can clog the fibers and reduce suction. Rinse longer instead, gently squeezing the foam until no more dirt washes out.

How often should you clean a Shark vacuum filter?

The schedule for Shark vacuum filter cleaning depends on how often and where you vacuum. Pet hair, fine dust and sawdust load the foam and felt faster than light household dirt. A drop in suction or a dusty smell from the exhaust signals the filter needs washing. Your model's manual lists the interval the maker recommends for each filter.

When should you replace a Shark vacuum filter instead of washing it?

Replace a Shark vacuum filter when washing no longer restores suction or the material looks damaged. Torn foam, frayed felt and a HEPA filter with crushed pleats all call for a new part. A filter that stays discolored or smelly after a full rinse and dry is also worn. Match the replacement to your exact Shark model number, since filter shapes differ between models.

Read next

Latest articles