# Repair a Garage Floor Drain

How to repair a garage floor drain: patch a cracked drain body, replace a grate, seal a drain pipe leak, clear a blockage and resurface the concrete around it.

To repair a garage floor drain, first find what failed, then match the fix to it: patch a cracked drain body with a hydraulic cement, replace a broken grate, seal a leaking pipe joint, clear a blockage or resurface the concrete around the rim. The job starts with a drain that is clean and dry so the repair material bonds to sound concrete. Work on any part of the drain body or the buried pipe itself needs a trained specialist when the damage reaches the pipe below the slab. 

## Find the source of the failure 

Before any concrete floor drain repair, wash the drain and watch where water goes during a slow pour. Water that backs up points to a drain blockage, while water that seeps at the rim or under the slab points to a cracked drain body or a drain pipe leak. A grate that rocks or sits loose often means the concrete ring around it has crumbled. Mark the wet spots with chalk and let the area dry completely before you open any patching material. 

## Patch the cracked body and rim 

A concrete floor drain repair patch works on cracks in the drain body and on the ring of concrete that holds the grate. Chip loose material away with a chisel until you reach sound concrete, then clean the cavity of dust and grit. Apply a hydraulic cement or a polymer-modified repair mortar, press it into the crack and shape it flush with the surrounding floor. Keep the patch damp as it cures so it hardens without shrinking away from the drain edges. 

## Handle grates, leaks and blockage 

Drain grate replacement is a simple swap when the metal or plastic grate is broken but the body is sound; lift the old grate and set a new one of the same size and load rating. For a drain pipe leak below the body, stop work and call a plumber, because sealing a joint under the slab needs the right fitting and a trained hand. Clear a drain blockage with a drain snake or a jetting tool before you resurface anything. Floor drain resurfacing with a thin concrete overlay restores a worn rim after the drain itself is sound. 

## Garage floor drain repair questions 

### Can I repair a cracked drain body myself? 

Yes, a cracked drain body at the surface can be patched by hand with hydraulic cement or a polymer repair mortar. Clean the crack to sound material, dampen it and press the patch in flush. A crack that runs through the body into the pipe below needs a specialist, because the repair must hold under the slab. 

### When does a garage floor drain need a new grate? 

A garage floor drain needs a new grate when the grate is cracked, bent or rocking in a broken ring of concrete. Match the replacement to the size and load rating of the old grate. Repair the concrete ring first so the new grate sits flat and does not move under a tire. 

### How do I tell a drain pipe leak from a blockage? 

A drain pipe leak shows water seeping at the rim or a damp patch beside the drain after use, while a blockage makes water back up in the drain and drain slowly. Clear a blockage with a snake or jetting tool. A leak below the drain body needs a plumber to open the joint and reseal it. 

### What does floor drain resurfacing involve? 

Floor drain resurfacing means applying a thin concrete overlay to a worn or spalled rim so water flows into the drain again. The drain body must be sound and the surface clean and damp before the overlay goes down. Resurfacing does not fix a cracked body or a leaking pipe, so repair those first.
