How to Prepare a Pressure Washer for Winter Storage

Learn how to properly winterize your pressure washer, including electric and gas models, to prevent freeze damage and ensure a smooth restart in spring.

4 min readEquipment Winterization & Seasonal Restart8 viewsHow to Prepare a Pressure Washer for Winter Storage
— · 0 votes
Contents
  1. Why Winterizing Your Pressure Washer Matters
  2. Tools and Supplies You'll Need
  3. Step-by-Step Winterization Process
  4. 1. Flush the System with Clean Water
  5. 2. Drain All Water from the Pump, Hoses, and Gun
  6. 3. Add Pump Saver or Antifreeze
  7. 4. Protect Hoses and Accessories
  8. Storing Your Pressure Washer for Winter
  9. Common Mistakes to Avoid
  10. Seasonal Restart Checklist for Spring
  11. Brand-Specific Tips for Popular Models
  12. Organizing Your Workflow for Seasonal Maintenance

Why Winterizing Your Pressure Washer Matters

Water expands when it freezes. If water remains inside your pressure washer's pump, hoses, or spray gun over winter, it can freeze and crack these components. A cracked pump or hose means expensive repairs or replacement. Proper winterization removes water and adds protection, so your pressure washer is ready to go when warm weather returns.

Tools and Supplies You'll Need

  • Pressure washer pump saver or RV antifreeze (propylene glycol, not ethylene glycol)
  • Clean water source
  • Fuel stabilizer (for gas models)
  • Clean rags
  • Wrench or pliers (to disconnect hoses)
  • Safety glasses and gloves

Step-by-Step Winterization Process

Follow these steps for both electric and gas pressure washers. For gas models, add fuel stabilizer to the gas tank before the final run to protect the fuel system.

1. Flush the System with Clean Water

Connect your pressure washer to a water supply and run it for a minute or two to flush out any detergent or debris. This prevents clogs and corrosion during storage. Use a garden hose and ensure the water is clean. After flushing, disconnect the water supply.

2. Drain All Water from the Pump, Hoses, and Gun

Turn off the pressure washer and disconnect the high-pressure hose and spray gun. Tilt the machine to drain any remaining water from the pump. Squeeze the trigger on the spray gun to release water from the hose. Let everything air dry for a few minutes.

3. Add Pump Saver or Antifreeze

Pump saver is a special lubricant and antifreeze designed for pressure washer pumps. Attach the bottle to the pump inlet (where the garden hose connects) and turn on the machine briefly until the liquid comes out of the outlet. This displaces water and coats internal parts. Alternatively, use RV antifreeze (propylene glycol) – never use automotive antifreeze, as it is toxic and can damage seals.

4. Protect Hoses and Accessories

Drain and coil hoses loosely to avoid kinks. Store them indoors in a dry place. Check O-rings and fittings for wear; replace if needed. For gas models, drain the fuel tank or add fuel stabilizer to prevent varnish buildup in the carburetor.

Storing Your Pressure Washer for Winter

Store the pressure washer in a dry, frost-free location such as a basement, heated garage, or shed. If you must store it in an unheated space, ensure all water is removed and pump saver is added. Cover the unit with a breathable cover to keep dust off, but avoid plastic covers that trap moisture.

Common Mistakes to Avoid

  • Skipping the pump saver: Water can remain trapped inside and freeze, cracking the pump.
  • Using automotive antifreeze: It's toxic and can damage rubber seals. Use only RV antifreeze or pump saver.
  • Storing with a full fuel tank without stabilizer: Gasoline degrades and clogs the carburetor. Always add stabilizer or drain the tank.
  • Leaving hoses connected: Water trapped in fittings can freeze and crack them.

Seasonal Restart Checklist for Spring

Before first use in spring, perform these checks:

  1. Inspect hoses, O-rings, and connections for cracks or leaks.
  2. Check the oil level (gas models) and change if necessary.
  3. For gas models, replace spark plug if corroded.
  4. Connect water supply and run water through the system without the nozzle to flush out any residual antifreeze.
  5. Test the spray gun and adjustable nozzle for proper operation.
  6. Check tire pressure on mobile units.

Brand-Specific Tips for Popular Models

BrandSpecific Winterization Advice
KärcherMany Kärcher electric pressure washers have a self-priming feature. Use Kärcher's own Pump Guard (or equivalent) and run it through the system as directed in the manual.
SimpsonSimpson gas pressure washers often have a low-oil shutdown. After winterization, store the unit upright and consider removing the battery (if electric start) for indoor charging.
Sun JoeSun Joe electric pressure washers are compact. Remove the wand and store separately to save space, but ensure all water is drained from the pump before storage.

Organizing Your Workflow for Seasonal Maintenance

Create a simple checklist and keep it with your pressure washer manual. After each winterization, mark the date and note any parts that may need replacing. This helps you stay ahead of maintenance and ensures a quick turnaround when you need the pressure washer for spring cleaning, deck washing, or vehicle detailing.