How to Clean Battery-Powered Power Tools
A clear method for cleaning cordless tool housings, battery contacts, vents and dust so your power tools stay dry, run cooler and last longer.
Contents
- Start with a dry clean of the housing
- Clear the vents and the dust
- Care for the battery contacts
- Questions about cleaning cordless power tools
- How do I clean battery power tools without damaging them?
- How should I clean the battery contacts on a cordless tool?
- How do I remove dust from the vents of a cordless tool?
- Does keeping tools dry really matter when cleaning?
Cleaning battery-powered power tools means removing dust and debris from the housing, vents and battery contacts while keeping moisture away from the electronics. The job takes a few simple steps and a few basic supplies, and it protects the motor, the switch and the battery from the grit that causes wear. Work with the battery removed and the tool switched off before you touch anything.
Start with a dry clean of the housing
Cleaning cordless tool housings begins with a soft brush or a dry cloth to lift dust from the shell and around the seams. A vacuum with a narrow nozzle pulls grit out of the grip and the joint lines where it collects. Wipe the outside with a barely damp cloth only after the loose dust is gone, then dry the surface at once. Keep water out of the switch, the vents and the battery socket because moisture inside the tool can damage the electronics.
Clear the vents and the dust
Vents and dust removal matter because a blocked air path makes the motor run hotter and shortens its life. Blow short bursts of clean, dry compressed air through the vents from a short distance. Hold the tool so the debris falls away from your face and work outdoors or in a ventilated space. A soft brush loosens packed dust in the vent slots before you blow it clear.
Care for the battery contacts
Battery contacts cleaning keeps the electrical connection firm and stops the tool from cutting out under load. Remove the battery first, then brush the metal contacts on both the pack and the tool with a dry, soft brush. A cloth lightly moistened with contact cleaner lifts film and oxidation, and the contacts must be fully dry before the pack goes back in. Never push a metal tool into the contacts and never soak a battery pack in liquid.
Questions about cleaning cordless power tools
How do I clean battery power tools without damaging them?
Battery power tools are cleaned with dry methods first, because dust is the main problem and water is the main risk. Remove the battery, brush the housing and vents, and use short bursts of dry compressed air. Wipe only with a barely damp cloth and dry the surface straight away. Keep liquids away from the switch, the vents and the battery socket.
How should I clean the battery contacts on a cordless tool?
Battery contacts cleaning is a dry job on both the pack and the tool. Take the battery out, brush the metal contacts with a soft dry brush, and wipe them with a cloth lightly moistened with contact cleaner. Let the contacts dry completely before you refit the pack. Never scrape the contacts with a metal tool or dip the pack in liquid.
How do I remove dust from the vents of a cordless tool?
Vents and dust removal work best with clean, dry compressed air in short bursts from a short distance. Point the tool so debris falls away from your face and work in a ventilated space or outdoors. Brush packed dust loose from the slots before you blow it clear. A clear air path lets the motor run cooler.
Does keeping tools dry really matter when cleaning?
Keeping tools dry matters because moisture inside a cordless tool can damage the motor, the switch and the electronics. Use a barely damp cloth only on the outside and dry the surface at once. Never rinse a tool or a battery pack under a tap. Let any cleaned part dry fully before you reassemble the tool.