# Foam Cannon Compatibility with Portland Pressure Washers

How to check a foam cannon fits a Portland pressure washer: spray lance connection, fitting size, adapter fittings, and pressure and flow rating.

Foam cannon compatibility with Portland pressure washers comes down to matching the cannon's inlet fitting to the spray lance connection and keeping the cannon within the machine's pressure and flow rating. A cannon that threads on correctly and is rated for the washer's output will foam properly, while a mismatch in either area causes leaks or weak foam. Checking the fitting size and the rating before you buy saves a return and a wasted job. 

## Match the spray lance connection 

A foam cannon attaches where the spray lance connection sits, so identify that joint before choosing a cannon. Many pressure washers use a quick-connect coupling on the lance, and a cannon sold for that coupling clicks straight on. Other lances end in a threaded nozzle, which needs a cannon with the same thread or an adapter fitting. Compare the actual connector on your machine rather than the model name alone. 

## Find the foam cannon fitting size 

Foam cannon fitting size is measured at the cannon's inlet, and the thread must match the lance or adapter exactly. Threads that look alike can differ in diameter or pitch, so measure the inlet across its width and count the threads where you can. A cannon supplied with a spare adapter covers more than one thread, which helps when the machine's connector is unclear. Bring the measurement to the seller when the listing gives only a model number. 

## Check pressure and flow rating 

Pressure and flow rating decide whether a foam cannon works well on a given Portland pressure washer. A cannon rated below the washer's output can be strained, and one rated far above it may foam weakly at low flow. Read both figures on the machine's label and compare them with the cannon's stated range. The dilution of soap and water in the bottle also affects foam thickness, so adjust that after the fitting and rating are correct. 

## Foam cannon questions for Portland washers 

### Is a foam cannon compatible with a Portland pressure washer? 

A foam cannon is compatible with a Portland pressure washer when its inlet fitting matches the spray lance connection and its rating covers the machine's pressure and flow. Compatibility is decided by those two checks, not by the brand name on the cannon. Confirm the connector type and the rating before you order. 

### What fitting size does a foam cannon need for a Portland washer? 

The foam cannon fitting size must match the connector on your specific Portland pressure washer, because the range includes more than one lance type. Measure the lance connection and the cannon inlet, then choose a matching cannon or an adapter fitting. A photo of the connector sent to the seller settles the question quickly. 

### Do I need an adapter fitting for a foam cannon? 

An adapter fitting is needed when the cannon's inlet thread does not match the spray lance connection on the pressure washer. Adapters convert between thread sizes and between threaded and quick-connect couplings. Choose one rated for the washer's pressure, and check that both ends seat without cross-threading. 

### Will a foam cannon reduce pressure at the nozzle? 

A foam cannon does add a restriction at the nozzle, and the pressure and flow rating of the cannon shows whether the washer can carry it. A cannon matched to the machine's output keeps performance close to normal. If foam looks thin, check the soap dilution and the fitting seal before blaming the washer.
