# Coating Thickness Gauge Brands and Models: TC100 and Elcometer

How the TC100 gauge and Elcometer thickness gauge differ in use, probe compatibility and calibration, and how to record dry film thickness at job close.

A coating thickness gauge from either line, the TC100 gauge or the Elcometer thickness gauge, measures dry film thickness (DFT) on a painted surface non-destructively. The two names reach detailers through different routes, so this page explains what each one is, how probe compatibility shapes the choice, and what calibration standards mean for a reading you can trust. It also covers where a thickness check fits when a job closes out. 

## What the TC100 gauge measures 

The TC100 gauge is a handheld electronic meter that reads coating thickness over a metal substrate. Its readings depend on a probe matched to the surface, so a ferrous probe reads steel and a separate probe handles aluminum or other non-ferrous metal. A paint thickness meter of this type reports dry film thickness in micrometers or mils, depending on the setting. A reading tells you film build on that spot, not the quality of the paint job. 

## Where the Elcometer name fits 

An Elcometer thickness gauge is one brand within the wider group of DFT gauge brands sold for coating inspection. Instruments from different brands share the same working principle, so probe type and calibration matter more than the name on the housing. Models differ in probe style, memory and how the reading is displayed. Match the gauge to the substrate and the film thickness range before you compare brands. 

## Calibration and probe care 

Calibration standards are reference shims or coated plates of known thickness used to check a gauge before and after a session. A probe that is dirty, scratched or pressed at an angle drifts away from the true value. Clean the probe tip after each job and store the gauge away from impact and heat. A gauge that fails a check against its standards needs service before it is used on a customer's paint. 

## Questions About Coating Thickness Gauges 

### Is a coating thickness gauge from Elcometer accurate on car paint? 

An Elcometer thickness gauge gives an accurate dry film thickness reading when the probe matches the substrate and the gauge is calibrated. Car paint sits over steel or aluminum panels, and each metal needs the correct probe. Check the gauge against calibration standards before trusting a number on a customer's vehicle. 

### What does a TC100 gauge read on a painted panel? 

A TC100 gauge reads the total dry film thickness of the coating stack above the metal. The number combines primer, color and clear coat into one figure, so it does not separate the layers. Compare readings across the panel to spot uneven film build after a repair. 

### Do different DFT gauge brands use the same probes? 

DFT gauge brands do not share probes across manufacturers, because each connector and probe is built for its own instrument. Probe compatibility is set by the maker, so a probe from one brand will not fit another brand's gauge. Keep the probe and gauge paired as supplied and record the probe type with each reading. 

### How do calibration standards keep a paint thickness meter honest? 

Calibration standards let you confirm a paint thickness meter against a known thickness before and after use. Place the shim or coated plate on the matching substrate and compare the displayed value with the standard. A gauge that drifts beyond its tolerance needs adjustment or service, and the check should be logged with the job.
